Overview

The Sticky Interface adds a powerful Linux controller to the iRobot Create. The board supports any of the Gumstix processor boards with 60 pin expansion connectors. Gumstix motherboards are small Linux computers that fit in the palm of your hand. The Gumstix products offer an open source software development kit so that you can quickly get your robot application up and running. Both the Connex and Verdex Gumstix motherboards have WiFi-capable expansion boards available, making it easy to build a wireless robot which can be programed and controlled remotely.

Features

• Provides a complete Gumstix motherboard to iRobot Create interface
• Compatible with the Basix, Connex and Verdex motherboards
• High-efficiency switching power supply maximizes battery life
• The Sticky interface connects to the standard Gumstix 60-pin expansion port
• Provides all the necessary logic-level conversion circuitry
• The USB serial console eliminates bulky RS-232 connectors
• The USB host connector enables easy connection to a USB flash drive or web camera
• Dual 5.0 logic-level I2C ports enables the addition of a wide range of off-the-shelf robotic sensors and controllers
• Several general purpose IO's are broken out for easy connection to external hardware

Sticky Interface Installation

Sticky Interface Hardware Reference

Sticky Interface Console Commands

Interface FAQ

The documentation is presented as a wiki so that you can add your own helpful information about using the product or correct any errors you might find on the site. Please get involved. If you are experiencing problems with your Element Direct product or if you'd like to discuss it with other users, please go to the support forum.